ComfyTENS TENS unit

Description 100 milliamp 2 Channel 5 Mode Digital TENS Unit with Timer Powerful (100mA) TENS unit. Rubber-grip sides and hinged front panel for easier access to digital mode, pulse and timer controls. Comes complete with instruction manual, leadwires, 4 electrodes, sturdy carrying case. Common Uses: Back pain, Neck pain, Joint pain, arthritis, post-op pain, post-traumatic acute pain, chronic pain. Comparable to the TENS 7000 Features 100 milliamp output Rubber grip sides Easy-to-read LCD screen Safety amplitude cover prevents bumping of controls 5 modes: Burst, Normal, Modulation, SD1, SD2 Control treatment time automatically (5 to 60 min) or use continuously Record up to 999 hours of treatment time Hinged front panel for access to digital mode, pulse and timer controls Durable METAL Belt Clip 3 Year warranty against manufacturer defects Technical Specifications Channels: Dual isolated between channels Pulse Amplitude: Adjustable 0-100mA peak into 500 ohm load each channel Pulse Rate: Adjustable 2-150Hz, 1 Hz step Pulse Width: Adjustable 50-300 microseconds, 10 microsecond step Wave Form: Asymmetrical Bi-Phasic Square Pulse Modes: B(Burst), N(Normal), M(Modulation), SD1(Strength Duration1), SD2(Strength Duration2) Burst Mode: Burst rate: Adjustable, 0-5 – 5Hz; Pulse width adjustable, 50~300uS; Frequency fixed = 100 Hz Normal Mode: The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value. Modulation mode: is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300uS) are fully adjustable. The SD1(Strength-Duration) mode: consists of automatic modulation intensity and pulse width in 40% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 40% while the pulse width is increased by 40% in 5 seconds. In the next 5 seconds, the intensity is increased by 40% while the pulse width is decreased by 40%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300uS) are fully adjustable. The SD2(Strength-Duration) mode: consists of automatic modulation intensity and pulse width in 70% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 70% while the pulse width is increased by 70% in 5 seconds. In the next 5 seconds, the intensity is increased by 70% while the pulse width is decreased by 70%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300uS) are fully adjustable Timer: Adjustable from 5 to 60 min, or continuous. Adjustable in 5 minutes each step. Treatment time counts down automatically. Patient Compliance Meter: 60 sets of operation records, 999 hours record time Low battery indicator: A low battery indicator will show up on the LCD when the battery is low. Warranty: 3 Year warranty against manufacturer defects Power Supply: 9V battery (disposable or NiMh rechargeable) Battery Life: 50-70 hours at average settings (disposable), 8-10 hours (rechargeable NiMh) Size: 10.1cm(h) x 6.1cm(w) x 2.45cm(d) Weight: 150 grams (including battery) System Includes: Stimulator, Lead Wires, 1 package of high quality Self-Adhesive Electrodes, 9V Battery, Hard Plastic Carrying Case, Instruction Booklet. *** A PRESCRIPTION IS REQUIRED UNLESS YOU ARE A HEALTH PROFESSIONAL OR RESELLER. PLEASE FAX TO 1-866-682-7756 OR EMAIL TO [email protected] *** For Clinicians & Distributors: FREE Private and Custom Labeling Stand out in a competitive marketplace with our exclusive Free Private Labeling service. Available only to B2B customers, including clinicians and DME distributors. We offer the opportunity to apply a custom label to each carrying case and/ or pack of electrodes. Completely free of charge. Your custom label can feature your logo, company name, office address, phone number, website, and any other information that helps you stay connected with your patients. With the option to blind dropship to customers and month/ supply kits for patients. Minimum quantities may apply. This service offers two key benefits: 1. Boost Patient Retention Custom labeling helps keep your practice top of mind. TENS unit accessories like electrodes need regular replacement. Your branded label serves as a constant reminder for patients to return to your office for future needs. This small, but impactful, touch helps build long-term relationships, ensuring that patients continue to choose you for their ongoing care and supplies. 2. Promote Your Practice & Gain Referrals Our Free Private Custom Labeling service doesn’t just help maintain your current patients it can help you grow your practice. When a patient shares their positive experience with the TENS/ EMS Units with friends or family, your custom label instantly directs potential new patients to your clinic. This turns every unit into a powerful promotional tool for your services. This service is just one way we show our commitment to helping you succeed. By choosing TENSproducts and utilizing our private labeling service, you’re not just purchasing a device—you’re investing in a tool that will help your practice thrive. Get Started Today! Interested in setting up private custom labeling for your practice? It’s simple! Just give us a call at 866-449-1010 (Monday-Friday, 9 AM – 5 PM MST) or email us at [email protected] , and we’ll walk you through the process.