Liters Capacity: 118 ml A low foaming, final acid anionic rinse for use in the beverage and food industries. Leaves tanks and equipment spotless and avoids mineral build-up Not affected by organic soils Do not use on soft metals Only 60 sec contact time needed! Can be used in CIP systems Dosage: 25 – 40 ml / 10 litres User manual in English & Italian Directions for use: use as a final rinse after thoroughly cleaning with a good alkaline cleaner such as PBW™. Use Saniclean™ at a rate of 25 – 40 ml per 10 L of water (1 oz/3 gal to 1 oz/2 gal of water). Apply by spray or soak with a contact time of at least 3 minutes. Empty or drain the recipient and let air dry. Close the packaging tightly after use and store in a dry, cool and well-ventilated place. Keep out of reach of children. DO NOT MIX SANICLEAN™ with chlorinated cleaners as chlorine gas will result.
